53
Driver controls
SCREEN WIPER/WASHER
CONTROLS
The following functions will operate
only with the ignition switched on.
Front screen
Lever positions:
1 = Single wipe
2 = Intermittent wiping
3 = Normal wiping
4 = High speed wiping
Intermittent wiping
(if equipped)
Position 2
The rotary switch can be used to
adjust the intermittent wiping
interval.
Replace the wiper blades as
soon as they begin to leave
bands of water and smears or
when they do not completely
remove water from the front
screen.
To Next Page
Loading...
