54
Driver controls
Rear screen
Intermittent wiping
Pull the lever towards the steering
wheel.
Reverse gear wipe
If no normal rear wiper function is
selected, but the front wipers are
set to intermittent, normal or high
speed operation, when reverse gear
is selected, the rear wiper will
follow the front wiper interval (at
intermittent or normal speed).
Washer
While the button at the end of the
lever is pressed or the lever is
pulled towards the steering wheel
the washer will work in conjunction
with the wipers.
Once the wash/wipe cycle is
completed, the wipers will pause
and then perform one more wipe to
clear the screen.
This will also operate the headlight
washers when the headlights are
switched on (depending on country
and equipment fitted).
After releasing the button or lever,
the wipers operate for a short time.
Do not operate the washer
for more than 10 seconds at
a time, and never when the
reservoir is empty.
To Next Page
Loading...
