161
Roadside emergencies
BULB REPLACEMENT
Always switch off lights and ignition
before replacing any bulb.
Never touch the glass of halogen
bulbs. Fit only bulbs having a UV
filter. Always replace a faulty bulb
with a new one of the same type.
Have the headlight
alignment checked by an
expert after each replacement of
a bulb. Ford authorized repairers
are recommended.
Headlight, side lights, direction
indicators
It is necessary to remove the light
assembly to remove any of the
bulbs. The required tool for this
procedure is a Torx screwdriver T6
or a suitable flat-bladed screw
driver.
DM
To Next Page
