40
Climate controls
Mono mode
In AUTO mode, the temperature
settings for both the driver’s and
passenger’s side are linked. If the
temperature is adjusted using the
buttons on the driver’s side, the
settings will also be adjusted to the
same setting on the passenger’s
side. In MONO mode, MONO
appears in the right-hand display.
Press the temperature buttons on
the passenger’s side to select the
desired temperature for the
passenger’s side. The temperature
for the driver’s side will remain
unchanged. The temperature
settings for each side are shown in
the displays and MONO will
extinguish from the display. It is
possible to set a temperature
difference of up to
4
o
C.
If one of the sides is set to HI or LO,
both sides will be set to HI or LO.
Setting different temperatures
for the driver’s and passenger’s
side
To Next Page
Loading...
