74
Locks (security)
In order to re-programme the
function, press and hold the and
buttons simultaneously for at
least four seconds with the ignition
switched off. The direction
indicators will flash twice to
indicate that the unlocking function
has been successfully
re-programmed.
Pressing and holding both buttons
simultaneously for at least four
seconds again will change the
function back.
Locking the vehicle
To activate central locking and arm
the anti-theft alarm system:
With the key: Turn the key in the
driver’s or front passenger’s door to
position 2.
With the remote control: Press the
button once.
On vehicles without double locking,
the direction indicators will flash
twice. On vehicles with double
locking, they flash only when
double locking is activated.
To Next Page
Loading...
