77
Locks (security)
Replacing the remote control battery
If the range of the transmitter in
the key decreases gradually, the
battery (type 3V CR 2032) should
be replaced.
Remote control type 1:
First, press the button to release
the key blade.
•
Insert a screw driver as far as
possible into the slot at the side of
the key and push it towards the key
blade to release the container from
the key blade.
•
Insert the screw driver into the
opening at the side of the container
and rotate it to start opening the
container.
•
To replace the battery
Proceed as follows:
This will be indicated by the message
REMOTE KEY BATTERY LOW
in the Message Centre display
REMOTE KEY
BATTERY LOW
To Next Page
Loading...
