79
Locks (security)
Replacing the battery
•
Insert the screw driver into the
opening marked with an arrow and
carefully prise out the battery. Take
care not to touch the battery
contacts or the printed circuit
board.
Insert a new battery using a soft
cloth and without touching the
battery contact. The plus contact of
the battery (marked with a +) must
face upwards.
Reassembling the container
Insert the key ring and assemble
the upper and lower housing by
placing them together and pressing
to snap them together.
Remote control type 1:
Assemble the key blade until it
snaps onto the container.
Remote control type 2:
Snap the transmitter unit back
onto the key.
Type 1
Type 2
Used lithium batteries must
not be disposed of in the
normal household refuse. Be
conscious of environmental
protection when disposing of used
batteries.
•
•
•
•
•
•
To Next Page
Loading...
