ELECTRIC VEHICLE INFORMATION
STARTING AND STOPPING
THE ELECTRIC MOTOR
To start your electric motor in the vehicle,
a valid remote control must be inside
your vehicle to switch the power on and
start your vehicle.
1. Be sure the vehicle is in park (P).
2. Press the brake pedal.
3. Press the Start Stop button.
NOTE: You will not hear any motor noise.
4. The
light illuminates.
To stop the electric motor when your
vehicle is not moving and the electric
motor is on or in the accessory mode,
press and release the Start Stop button
without pressing the brake pedal. This
shuts o the electric motor and all
electrical accessories.
To stop the electric motor when your
vehicle is moving, press the Start Stop
button three times within two seconds,
or press and hold for at least one second.
Shi into neutral (N) and use the brakes
to bring your vehicle to a safe stop. When
your vehicle comes to a complete stop,
shi into park (P).
WHAT IS THE HIGH
VOLTAGE BATTERY?
The high voltage battery stores electrified
power used by the electric motor to
propel the vehicle.
PEDESTRIAN ALERT
SYSTEM
Due to the quiet operation of hybrid
and electric vehicles at low speeds, the
system creates a subtle sound to alert
pedestrians. The system is on when
your vehicle is running and not in park
(P). Some sound may be audible in the
passenger compartment.
15
To Next Page
Loading...
