Blind Spot Assist Information Messages
DetailsMessage
Displays if you attach a trailer to your vehicle.Blind Spot Assist Not
Available Trailer
Attached
Displays if the blind spot information system sensors are
blocked.
Blind Spot Assist Not
Available Side Sensor
Blocked
The system has detected a fault that requires service. Have
your vehicle checked as soon as possible.
Blind Spot Assist System
fault
For more information See Blind Spot Information System (page 304).
BLIND SPOT ASSIST WITH
TRAILER COVERAGE -
VEHICLES WITH: BLIND SPOT
INFORMATION SYSTEM/
TRAILER TOW
WHAT IS BLIND SPOT ASSIST
WITH TRAILER COVERAGE
Blind spot assist with trailer coverage is an
extension of the lane keeping system that
provides a blind spot warning and steering
assistance during lane changes if it detects
adjacent vehicles.
Note: When attaching a trailer you must
configure it so the system can recognize it.
See Blind Spot Information System With
Trailer Coverage (page 306).
HOW DOES BLIND SPOT ASSIST
WITH TRAILER COVERAGE WORK
Activate and deactivate the system using
the lane keeping system button on the turn
signal stalk.
During lane changes, the design of the
blind spot assist with trailer coverage
detects vehicles in, or approaching, your
blind spot and provides a warning, plus
steering assistance to direct your vehicle
back into your lane.
When active, this system functions with or
without the use of turn signals and hazard
flashers.
300
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
Lane Keeping System
To Next Page
Loading...
