WHAT IS PRE-COLLISION
ASSIST
Pre-collision assist detects vehicles,
cyclists or pedestrians in the road ahead
of you, or who could cross the vehicle’s
path, and warns you of their presence. If
you do not respond, the system
automatically applies the brakes.
HOW DOES PRE-COLLISION
ASSIST WORK
The pre-collision assist system is active
when your vehicle reaches a speed greater
than approximately 6 mph (10 km/h).
Pedestrian and cyclist detection is active
at speeds up to 50 mph (80 km/h).
If your vehicle is rapidly approaching
another stationary vehicle, a vehicle
traveling in the same direction as yours, a
pedestrian or a cyclist within your driving
path, the system is designed to provide
three levels of functionality.
DetailsLevel of Functionality
When activated, a warning lamp flashes and an audible
warning sounds.
Alert
The system is designed to help reduce the impact speed by
preparing the brakes for rapid braking. The system does not
automatically apply the brakes. If you press the brake pedal,
the system could apply additional braking up to maximum
braking force, even if you lightly press the brake pedal.
Brake support
The system is designed to apply the brakes if it detects a
crash is imminent. This may help reduce impact or avoid the
crash.
Automatic emergency
braking - vehicles without
adaptive cruise control
The system is active at speeds up to 80 mph (130 km/h).
The system is designed to apply the brakes if it detects a
crash is imminent. This may help reduce impact or avoid the
crash.
Automatic emergency
braking - vehicles with
adaptive cruise control
312
2022 Transit (TTH) Canada/United States of America, NK3J 19A321 AA enUSA, Edition date: 202107, First-Printing
Pre-Collision Assist
To Next Page
Loading...
