To Next PageTo Next Page
Need help?Do you have a question about the FOREDOM CC Series and is the answer not in the manual?
General| Brand | FOREDOM |
|---|---|
| Model | CC Series |
| Category | Power Tool |
| Language | English |
Essential safety guidelines for operating Foredom power tools to prevent injury.
Visual guide and introduction to the Foredom power tool series discussed in the manual.
Critical steps for correctly assembling and adjusting the flexible shaft and sheath.
Instructions for connecting the foot pedal speed control to the motor.
Instructions for connecting the dial speed control to the motor.
Detailed instructions for attaching accessories to various types of Foredom handpieces.
Instructions for collet types (8, 8D, 25, 28, 28SJ, 35, 35SJ, 44T, 44TSJ).
Instructions for Jacob's type chuck handpieces (25C, 30®, 30SJ).
Instructions for hammer type handpieces (15, 15D, 15SJ).
Instructions for latch type handpieces (55A, 55D, 56A, 56D).
Instructions for quick change type handpieces (7A, 7AD, 10, 10D, 18, 18D, 18SJ, 52, 52D, 52SJ).
Guidelines for lubricating various Foredom handpiece models to ensure proper performance.
Specific lubrication steps for 7A and 7AD handpieces every 20 hours of operation.
Lubrication requirements for the Number 10 handpiece after initial use.
Lubrication for the 10D handpiece with duplex spring connection every 20 hours.
Lubrication instructions for 15 and 15D handpieces every 100 hours of use.
Lubrication for handpieces with duplex spring connections every 20 hours.
Guidance on selecting and using various Foredom accessories for different tasks.
Recommendations for abrasive accessories for cutting, grinding, and polishing.
Guidance on using vanadium steel, carbide, and engraving burs for various materials.
Usage recommendations for sanding accessories on wood, plastic, and metal.
Use of felt and cotton buffs for buffing and polishing operations.
Applications of miniature power brushes for cleaning, deburring, and finishing.
Use of diamond burs for removing stock from extremely hard materials.
Advice against applying excessive pressure, letting the tool's speed do the work.
Instructions on how to handle perceptible power decreases during operation.
How to clean motor air circulation slots to prevent dust buildup and electrical shorts.
Procedures for cleaning and lubricating the flexible shaft and sheath.
Steps for replacing worn flexible shafts and sheaths on Foredom power tools.
Detailed steps for installing a new flexible shaft onto the motor.
How to adjust the new shaft and sheath for correct protrusion.
Instructions for checking and replacing worn motor brushes.
Warning against changing motor direction while running and correct procedure.
Importance of securely tightening chuck nuts or jaws for safe operation.
Guidance on using forward direction for fluted burs and cutters.
