FOREDOM SR Series User Manual

Owner’s Manual 1/6 HP Series SR
Flexible Shaft Power Tools
For Your Own Safety
•
Please read this Assembly, Operation, and Service Manual before
operating your Foredom power tool.
•
Always wear eye protection while using power tools.
•
Only use accessories rated for use at 18,000 RPM or higher.
FRANÇAIS
Guide d’utilisation pour outils
électriques de série SR à arbre
flexible de 1/6 ch
Pour votre propre sécurité
•
Veuillez lire ce manuel d’assemblage, d’utilisation et d’entretien
avant d’utiliser votre outil électrique Foredom
MD
.
•
Protégez toujours vos yeux lorsque vous utilisez des
outils électriques.
•
Utilisez uniquement des accessoires fonctionnant à 18,000 tr/min
ou davantage.
ESPAÑOL
Manual de Instrucciones
Series SR 1/6 HP de baleros blindados
y lubricados permanentemente
Aviso
•
Antes de usar su motor Foredom por favor leer este
Manual de Instrucciones.
•
Siempre use protección para sus ojós y cara.
•
Use únicamente accesorios clasificados para 18,000 rpm o más.
FOREDOM
®
SR
FOREDOM
®
Foredom Electric Company
16 Stony Hill Road
Bethel, CT 06801, U.S.A.
Tel: 203-792-8622 • Fax 203-796-7861
www.foredom.net
F-1268 12/2020 Printed in USA
Separate Instructions for Square
Drive Shafts may be included if
required.
Des instructions séparées pour
les arbres d’entraînement carrés
peuvent être incluses si nécessaire.
Se pueden incluir instrucciones
separadas para ejes de transmisión
cuadrados si es necesario.

FOREDOM SR Series Specifications

General

Reversible	Yes
Duty Cycle	Continuous
Speed Range	0-18, 000 RPM
Foot Control	Optional
Power	1/6 HP
Speed	0-18, 000 RPM
Voltage	115V
Handpiece Compatibility	Foredom handpieces
Motor Style	Hanging

Summary

Safety Instructions

Replace or repair worn cord immediately

Ensure the power cord is in good condition to prevent electrical hazards.

Use proper grounding procedures

Ground the tool correctly to prevent electric shock.

Never change motor direction while the motor is running

Avoid changing motor direction mid-operation to prevent damage.

Foredom® 1/6 HP Series SR Power Tools

Assembly Instructions

Flexible Shaft and Handpiece Assembly

Guides on correctly assembling and adjusting the flexible shaft and handpiece.

Critical Assembly Checks

Connecting a Foot Speed Control

Connecting a Foot Speed Control

Connecting a Table Top Dial Speed Control

Maintenance Procedures

Routine Cleaning of Motors

Procedures for cleaning motor air intake slots to prevent overheating and shorts.

Routine Cleaning & Lubrication of Flexible Inner Shaft

Guidelines for cleaning and lubricating the flexible inner shaft for longevity.

Exposing the Inner Shaft

Steps to expose the inner shaft for proper cleaning and lubrication.

Replacement of Worn Shafts and Sheaths

Installation of New Shaft

Step-by-step guide on how to install a new flexible shaft and sheath.

Replacement of Motor Brushes

Replacement of Motor Brushes