FOREDOM SR Series - Handpieces

H.18
H.20
H.10
H.8D
H.10D
H.15D
H.18D
H.20D
New Adapters
HP771 Key Tip handpiece to Slip Joint shaft
HP770 Slip Joint handpiece to Key Tip shaft
HP775 Duplex adapter for Key Tip handpiece
and shaft
HP776 Duplex adapter for Slip Joint hand-
piece and Key Tip shaft
* Never run Handpieces H.15, H.15D or H.50 in reverse rotation.
If you have purchased a SRH motor with Square Drive
Shaft, see insert for special Square Drive Handpieces f
or Square Drive Shafts.
*
*
*
FOREDOM
®
Handpieces for Key Tip Shafts
(burs not included)
H.30
®
Chuck-style Handpiece General purpose,
versatile, precise, with geared jaw to hold burs
with shanks up to 5/32″ (4mm) diameter.
Collet-style Handpieces General purpose,
versatile, precise, with removeable collets to hold
burs with shanks: 3/32″ (2.35 mm), 1/8″, 1/4″.
Other diameters and metric available.
Quick Change Handpieces with levers
Can hold 2.35 mm (3/32″) shank burs. Popular with jewelers.
Special Use:
Hammer Handpiece for stone setting and decorative
work in metal.
H.15
Chisel Handpiece for woodworkers and carvers.
H.50 or
H.50C
Extremely high tolerance & high production Handpiece
Collets hold the accessories.
H.25
Handpieces with Duplex Springs
for extra flexibility
Recommended for experienced users for delicate work.
Popular with jewelers.
H.44T
H.43T
H.28
H.8
19
Advertisement