FOREDOM TX Series - User Manual

Owner’s Manual
Assembly, Operation and
Service Manual for
Series TX & LX
Flexible Shaft Power Tools
See Insert with
Special Instructions
for Square Drive
Series TXH and
LXH Models
2-Year
Limited Warranty
For Your Own Safety
s Please read this Assembly, Operation, and Service Manual
before operating your Foredom power tool.
s Always wear eye protection while using power tools.
s Always use an accessory which has the same or a higher speed rating than your tool.
Using an accessory with a lower speed rating can result in serious injury.
s For the TX Series – Only use accessories rated for use at 15,000 RPM or higher.
s For the LX Series – Only use accessories rated for use at 5,000 RPM or higher.
FOREDOM
®
Visit www.foredom.net to view videos on this product!

Summary

Safety Instructions

Assembly Instructions

Assembly and Adjustment of Flexible Inner Shaft, Outer Sheath, & Handpiece

Procedure for correctly assembling and adjusting the flexible shaft and sheath for Foredom tools.

Connecting Speed Controls

Connecting Foot Speed Control

Instructions for connecting Foredom foot speed controls to motors and power outlets.

Hanging Motor Installation

Foredom Handpieces

Attaching Accessories to Handpieces

Handpiece Lubrication

Operation and General Guidelines

Maintenance Procedures

Routine Cleaning of Motors

Routine Cleaning and Lubrication of Flexible Inner Shaft

Replacement Procedures

Replacement of Worn Shafts and Sheaths

Guide for replacing worn flexible shafts and sheaths to maintain tool functionality.

Shaft and Sheath Adjustment

Replacement of Motor Brushes

Limited Warranty

Contact Information

FOREDOM TX Series Specifications