What to do if the flash button does not respond on Foreo Hair Removal System?
If the flash button on your Foreo Hair Removal System isn't responding, first ensure that the treatment window is making full contact with your skin. If that doesn't work, try unplugging the device and then plugging it back in.
Why won't my Foreo PEACH 2 sync to the app?
If your Foreo Hair Removal System won’t sync to the FOREO app, try these steps: 1. Switch your Bluetooth off and then on again. 2. Close and reopen the FOREO app. 3. Check for app updates in your mobile device’s app store.
What to do if Foreo PEACH 2 Hair Removal System is damaged?
If the Foreo Hair Removal System, treatment window, power supply, or cable is damaged, broken, cracked, or appears defective, do not use it. If you have any doubts about the device's safety or suspect damage, usage is prohibited. Refer to the website for further assistance.
Overview of the PEACH 2 device components, including cooling, treatment window, buttons, and app connectivity.
Details on the expected results and timeline of hair growth reduction with PEACH 2 treatments.
Key contraindications for using the PEACH 2 device, including skin tone and specific medical conditions.
Essential safety information regarding eye protection from the device's intense pulsed light.
Steps for unlocking the device, preparing the skin area, and performing a patch test.
Instructions for turning on the device and adjusting intensity levels.
Instructions for using the continuous glide mode for fast treatment of large body areas.
Instructions for using the stamp mode for precise treatment of small or hard-to-reach areas.
Solutions for common problems such as device not turning on, flash issues, app sync problems, or damage.
Information on how to register your device and the terms of the 2-Year Limited Warranty.
The FOREO PEACH™ 2 is an over-the-counter device designed for the removal of unwanted body and/or facial hair, utilizing Intense Pulsed Light (IPL) technology. It aims to break the cycle of hair growth by transferring light energy through the skin's surface, which is then absorbed by melanin in the hair shaft. This absorbed light energy converts to heat, disabling the hair follicle and causing treated hairs to naturally fall out over 1-2 weeks. The device is suitable for use on body hair and female facial hair below the cheek line. It is effective on light, medium, and dark skin tones, up to and including skin tone 5, and on naturally black or brown hair. It may not be as effective on white, grey, blonde, or red hair.
The PEACH™ 2 features Skin Cooling Ducts that gently air cool the skin for optimal comfort during treatment. A 9 cm² Treatment Window delivers 7.3 J/cm² of IPL energy for quick and efficient hair removal and to prevent regrowth. For eye safety, an innovative Protective Shield made of silicone protects the eyes from intense light pulses. The device also includes a Device Cooling Vent to ensure it remains cool for optimal treatment.
Operation is straightforward with a Flash Button that activates the IPL flash. Pressing it once engages 'Stamp Mode,' while continuous pressing activates 'Glide Mode.' Plus & Minus Buttons allow users to adjust the IPL intensity level to suit their skin's needs for different body areas. Indicator Lights clearly show the selected IPL intensity level. The device is designed with a Self-Adjusting Head that is bendable, allowing for easy, even, and comfortable treatment of hard-to-reach creases and corners of the body.
The PEACH™ 2 is App Connected, offering access to more settings, treatment guidance, and reminders through the FOREO app. It comes with 4 Plug Adaptors that can be easily attached and detached from the power cable, making it suitable for use at home or abroad. A Cleaning Cloth is also provided to keep the device clean and dry.
Before first use, users must unlock and register their PEACH™ 2 via the FOREO app, which can be done by scanning a QR code found on the packaging or Quick Start Guide. Preparation involves removing any visible hair from the skin, with shaving recommended for body hair and dermaplaning for facial hair, ensuring no hair remains above the skin surface to prevent injury and debris accumulation. The treatment area should be clean and dry.
To turn on the device, the relevant plug adaptor is attached to the power cable, which is then connected to an electrical outlet. The device powers on automatically, and intensity levels can be adjusted using the plus and minus buttons. Levels 1-3 are recommended for sensitive areas and first-time users, with the suggestion to increase the setting within the recommended intensity range if comfortable, as reduced light intensity may require more treatments for desired effects.
A Patch Test is recommended before the first treatment on any new body area. This involves treating an approximately 3cm x 3cm area (equivalent to one flash) in 'Stamp Mode' and waiting 24 hours to check for adverse reactions. If no reaction occurs, the surrounding area can be treated, but the patch-tested area should not be re-treated for at least two weeks.
The device offers two treatment methods:
For effective treatment, the PEACH™ 2 treatment window must be in full contact with the skin for the flash to work. Users should ensure even application, avoiding missed spots by placing the window directly next to previously treated areas, but also avoiding flashing the same area more than once to prevent skin reactions. If intense pain is experienced, treatment should be stopped immediately, and a physician consulted.
The recommended treatment schedule for optimal results is once every two weeks for 12 weeks to ensure all hair follicles are treated. After this initial phase, monthly treatments or treatments as required are recommended for maintenance. Treatments should ideally occur within three days before or after the planned date; if this window is missed, the initial phase should be restarted.
For maintenance, after each treatment, the device should be switched off by unplugging it from the power supply. The treatment window should be thoroughly wiped with a slightly damp, lint-free cloth. It is crucial to keep the front of the device and reflector free from dirt, hair, or other debris to ensure maximum performance. The treatment window can get hot, so it should not be touched or cleaned for at least 5 minutes after use to allow it to cool down. Cleaning products containing alcohol, petrol, or acetone should never be used, as they can irritate the skin and damage the silicone. Care should also be taken to prevent water from entering any openings, including the skin cooling ducts.
General| Connectivity | Bluetooth |
|---|---|
| Cordless Use | Yes |
| Technology | IPL (Intense Pulsed Light) |
| App Support | Yes, Foreo App |
| Battery | Rechargeable battery |
| Warranty | 2 years |
To Next Page
