FOREVER FLEX - Drone Landing; Advanced Flight Modes; Headless Mode Operation

8
EN
Manual landing:
Using the altitude control lever, lower the drone’s altitude. Hold the altitude control lever in an
extreme bottom position – the drone will land and turn off the motors.
Automatic landing:
Click the auto-landing button. The drone will automatically lower the fl ight altitude, and then land
and turn off the motors.
Headless mode
A standard drone control consists of moving in accordance with the design of the drone, that
is by pressing the control lever up, the drone will fl y in the direction pointed by its front side. In
the headless mode, control is based on the position of the drone in relation to the remote in the
moment of activation of the mode. This means that if we activate the headless mode when the
drone is turned sideways to us, moving the control lever up will make the drone move away from
us instead of fl ying sideways like in case of standard control. This mode facilitates control, as the
user does not have to worry about the position of the front side of the device.
Mode activation: During drone’s fl ight, press and hold the headless button.
Warning! Before activating the headless , calibrate the drone using the automatic calibra-
tion button. When controlling the drone in the Headless mode, the user should remain in
the place where mode was activated. Moving when the Headless mode is activated may
result in loss of control!
Drone fl ight speed change
The drone has 3 fl ight speeds:
– low (30% power)
– medium (60% power)
– high (100% power)
Together with the increase of the drone’s speed, its sensitivity to issued commands grows. Begin-
ner users should use the lowest speed.
The speed may be changed by pressing the Flight speed change button. By standard, after star-
ting up the drone is set to the lowest speed. After pressing the button, the user hears a sound
signal:
– a single signal – low speed is set;
– a double signal – medium speed is set;
– a triple signal – fast speed is set.
Stunt mode
The drone off ers a stunt mode, in which it can perform 360 degrees rotation in four directions
(forward/backwards/left/right)
To rotate the drone:
1. The drone must be at the altitude of at least 2 m.
2. Click the fl ight direction control lever (right lever).
3. Point the fl ight direction lever in the desired direction of a stunt.
8
EN
Manual landing:
Using the altitude control lever, lower the drone’s altitude. Hold the altitude control lever in an
extreme bottom position – the drone will land and turn off the motors.
Automatic landing:
Click the auto-landing button. The drone will automatically lower the fl ight altitude, and then land
and turn off the motors.
Headless modeHeadless mode
A standard drone control consists of moving in accordance with the design of the drone, that
is by pressing the control lever up, the drone will fl y in the direction pointed by its front side. In
the headless mode, control is based on the position of the drone in relation to the remote in the
moment of activation of the mode. This means that if we activate the headless mode when the
drone is turned sideways to us, moving the control lever up will make the drone move away from
us instead of fl ying sideways like in case of standard control. This mode facilitates control, as the
user does not have to worry about the position of the front side of the device.
Mode activation: During drone’s fl ight, press and hold the headless button.
Warning! Before activating the headless , calibrate the drone using the automatic calibra-
tion button. When controlling the drone in the Headless mode, the user should remain in
the place where mode was activated. Moving when the Headless mode is activated may
result in loss of control!
Drone fl ight speed changeDrone fl ight speed change
The drone has 3 fl ight speeds:
– low (30% power)
– medium (60% power)
– high (100% power)
Together with the increase of the drone’s speed, its sensitivity to issued commands grows. Begin-
ner users should use the lowest speed.
The speed may be changed by pressing the Flight speed change button. By standard, after star-
ting up the drone is set to the lowest speed. After pressing the button, the user hears a sound
signal:
– a single signal – low speed is set;
– a double signal – medium speed is set;
– a triple signal – fast speed is set.
Stunt modeStunt mode
The drone off ers a stunt mode, in which it can perform 360 degrees rotation in four directions
(forward/backwards/left/right)
To rotate the drone:To rotate the drone:
1. The drone must be at the altitude of at least 2 m.
2. Click the fl ight direction control lever (right lever).
3. Point the fl ight direction lever in the desired direction of a stunt.