What to do if Formax FD 300 Folding Machines display 'PAPER ERR'?
If your Formax Folding Machine displays 'PAPER ERR' on the control panel, power off the machine. Inspect the fold plates for any jammed paper. If paper is jammed, remove the fold plate(s), clear the jammed paper, and then reinstall the fold plate(s).
Why is my Formax Folding Machines paper folding incorrectly?
If your Formax Folding Machine is folding paper incorrectly, ensure the fold plates are correctly inserted (upper on top, lower on bottom) and properly seated on their alignment pins. Also, check that the fold stops match the positions shown on the guide and that the thumbscrews have been tightened.
How to fix Formax FD 300 Folding Machines overload?
To resolve an overload issue on your Formax Folding Machine, verify the outfeed wheels are properly adjusted for the fold type and paper size. Turn the folder off and then on again to reset it.
What to do if Formax FD 300 paper will not feed?
If the paper is not feeding into your Formax Folding Machine, adjust the paper guides so that a single sheet of paper slides freely between them without excessive play. Also, check that the paper is correctly loaded in the infeed tray, with the leading edge under the feed tires.
General| Brand | Formax |
|---|---|
| Model | FD 300 |
| Category | Folding Machines |
| Language | English |
Details the hopper capacity, speed, paper size, fold types, dimensions, weight, and power supply.
Provides essential safety precautions for operating the paper folder, including warnings and proper usage.
Instructions for installing the upper fold plate by aligning notches with machine body pins and locking it.
Instructions for installing the lower fold plate by aligning notches with machine body pins and locking it.
Guide for setting fold stops based on paper size and fold type, and adjusting thumbscrews for precise folding.
Procedure for adjusting outfeed wheels to match fold type and paper size for proper paper stacking.
Instructions on how to load paper correctly into the infeed and adjust side guides for flat paper alignment.
Explanation of the LCD screen, START, STOP, BATCH, and CLEAR/RESET buttons and their functions.
Details on using the resettable counter and setting up AutoBatch for folding sets with pauses.
Guidance on responding to the 'NO PAPER' indicator on the control panel by reloading paper.
Step-by-step examples for setting uneven 'C' and 'Z' folds by measuring and adjusting fold plate stops.
To Next Page