05
SAFETY GUIDELINES
Do not wear loose clothing, neckties, improper gloves, or jewelry while operating this machine. If
long sleeves must be worn, avoid loose cuffs or buttons, Tie back or contain long hair.
Wear proper gloves to prevent lacerations caused by sharp edges of stock as it travels through the
forming operation.
Never operate this equipment unless all covers and guards are properly installed.
Be alert for loose, worn, or broken parts. Never operate this equipment unless it is in good working
condition.
As the stock enters the guides and feeds into the rolls, a pinch point is created as the stock advances.
Keep hands clear of area and all pinch points.
Always disconnect the main power supply power and install lock outs using a lockout / tagout procedure
when making adjustments or repairs.
When transporting, take into consideration that the machine is top heavy and may suddenly tip over.
The machine is designed for fixed installations and are not intended for portability.
You are NOT ready to operate this equipment if you have not read and
understood all of the safety information in this manual.
!!
!!
!
WARNING:
Remember that the information contained in this manual is only a portion of an adequate
training program. It must be coupled with specific instructions for your application along
with full information of national and local safety regulations that may apply.
The Lockformer Rollformer described in this manual has been tested for noise DB levels.
At normal operating distance the machine should be no more then 75DB.
SOUND PRESSURE INFORMATION
YEAR OF MANUFACTURE
To Next Page
Loading...