FORMULER Z8 - Remote Controller Functions; Synchronizing TV Remote with Formuler Remote

http://iptv-rivesud.com http://tv-diablo.com iptv.rivesud@gmail.com
16
Remote controler
There is two type of remote controler GTV-BT1 and GTV-IR1
Furthermore, button position is different from one remote to the other one
Synchronisation between TV remote and formuler remote controler
Models that come with a learning remote have the ability to learn the IR codes of your
TV, stereo, etc.
To do this you will need your original remote of other devices. Please follow steps
below.
1. Press and hold TV button for 5 seconds
The LED will change from blinking to solid as your formuler remote enters a
learning mode
2. Press the key you want to reprogram on your formuler remote (TV or Source...)
3. Aim two remotes correctly *head to head within 3cm and press the button you
want to copy from
If the button programs correctly your Formuler remote will blink 3 times
4. Exit learning mode by pressing any other button on your formuler remote, the
LED will turn off to confirm
You may repeat the steps to reprogram another key
󰌏󰌐 IMPORTANT
 If your TV is only RF remote, Formuler IR remote cannot learn the signal
 In some cases, you can use TV remote for Formuler.
e.g.LG magic remote works well after setting up from Device connector.
Please see the video tutorial below to program your formuler remote
https://youtu.be/Z-qq3xFHOXY