http://iptv-rivesud.com http://tv-diablo.com iptv.rivesud@gmail.com
29
To record channels, you need a USB drive (dongle or external hard drive, etc.) to store
recordings.
1. Insert a correctly formatted USB info your Formuler
2. Bring up the grid EPG list by pressing the EPG/Guide button on the remote
3. or Press the INFO button on the remote and press the Right arrow to show up
the single EPG list
4. Navigate to a future program you want to record
5. Press the 'RECORD or OK button' on the remote
6. Refer to the tutorial video: [Video Guide] MYTVOnline2 - How to schedule
recordings
OK button will bring up a pop-up window where you can adjust start/end time,
duration and frequency.
You can also manage the schedules from 'Mytvonline2 > Menu >
Schedule' menu.
'Extra recording time' (Mytvonline 2 > Menu > Settings > DVR Options) can add
extra time at the beginning/end of schedule.
Schedule a recording when "no information" is displayed in the EPG
You can schedule a recording even if there is "No Information" displayed in the EPG by
following the instructions below:
1. Insert a correctly formatted USB into your Formuler
2. Open MYTVOnline2 and open the EPG (Program Guide). Press the EPG button
on the remote
3. Move the cursor to the approximate desired recording time slot
4. Press OK or REC on the remote
5. A popup window will appear the will allow you to schedule the recording
6. Modify the Start and End time as desired and press "Save"
To Next Page
Loading...
Need help?
General
Weight and Dimensions
