1
2
INT-SL
WIRING / CONNECTION GUIDE
See wiring schematic configuration
Lock
12V Battery (+)
Lt. Blue/Black
Unlock Driver 1
Ground (-)
White/
Black
Ignition
Data-Link
Pink/Black
(-) While running
Data-Link
Green
Door trigger
Orange/Black
Data OBD2
Purple/White or Purple/Black
Bypass PK
Yellow/Black
Lt. Blue
Red
Trunk
White
Black
Unlock Driver 2
Pink
Blue
Parking light
Blue
White
Orange
Purple
Data BCM
Yellow
Bypass P 3K
DATA INTERFACE MODULE SELF-LEARNING FOR SECURITY SYSTEM AND / OR REMOTE STARTER.
3
Connect wire to vehicle
Connect wire to Remote-Starter/Alarm
INPUT
OUTPUT
2
3
4
5
6
7
2
IGN
START
OFF
8
9
10
IGN
START
OFF
IGN
START
OFF
LED
Programming
button
Press and hold the programming
button. Plug in the
in the INT-SL interface.
connector 1
Plug the into the
INT-SL interface.
connector 2
The LED will turn on, indicating
the beginning of programming.
While holding the programming
button, turn the key to the ignition
position.
The LED will flash rapidly.
Release the programming button.
Start the vehicle with the key.
The LED will turn off.
Turn the key OFF.
The interface is programmed.
1
Make the connections of the INT-SL to the
vehicle:
1.A
1.B
Connector 2 (White):
(I) Locate the wiring type for the vehicle on the
VEHICLE FIT GUIDE (P.2)
(II) Make the connections associated with the vehicle in the
WIRING SCHEMATIC CONFIGURATION (P.3)
Starter or alarm
Data Link Port
1
P. 1
Plan 1
START HERE
INSTALLATION AND PROGRAMMATION INSTRUCTIONS
Starter or alarm
2
1
Red +12V
Black
Plan 2
Cut off one plug of the
Data-Link connector,
connect the red wire
to +12V and the black
wire to ground.
Connector 1 (Black):
Determine the type of installation:
DATA-LINK ( )INSTALLATION WITH See plan 1, below
DATA-LINK (See plan 2, below)INSTALLATION WITHOUT
1
2
Copyright © 2007, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED
INSTALLATION WITH DATA-LINK
WARNING: Connector 2 can be easily plugged in backwards.
WARNING: Connector 2 can be easily
plugged in backwards.
(Type 3 only) (Type 3 only)
INSTALLATION GUIDE
Made in Canada - Rev. K - 17 / 03 / 2009
Web site: http://www.ifar.ca
Futur Input
Tach
~
WEB
UPDATE
COMPATIBLE
7170350 00126
INSTALLATION WITHOUT DATA-LINK
Chrysler vehicle go step 9
Manufactured under US patent No.:
Canadian Patent No.:
Européen Patent No.:
5,719,551 6,011,460 B1
6,243,004 B1 6,249,216 B1
6,275,147 B1 6,529,124 B2
6,696,927 B2 6,756,885
B1 6,756,886 B2 6,771,167 B1
2,320,248 2,415,023
1,053,128
Neither the manufacturer or distributor of
this module is responsible of damages of
any kind indirectly or directly caused by this
module, except for the replacement of this
module in case of manufacturing defects.
This module must be install by qualified
technician. This instruction guide may
change without notice. isit www.ifar.ca to
get latest version.
V
Technical support:
Web: www.ifar.ca
TEL: 514-255-HELP (4357)
FAX: 514-255-1367
To Next Page
Need help?
General
