7
Connecting the phone
1. Connect the handset cord to the handset jack on the phone.
2. Optionally, connect an amplified headset to the
jack.
3. Connect the WAN port
to the network with the provided Ethernet cable.
4. Optionally, connect your desktop PC to the PC port
with an Ethernet cable
(notsupplied).
5. If the network supports PoE, a power adapter is not required. The phone requires a DC
48V 0.3A PoE connection. If PoE is not supported on the network, connect a DC 5V
2A power adapter to the power jack.
To Next Page
Loading...
