Personalizing your Phone Page 6 FortiFone User Guide
Personalizing your Phone
How to navigate through menus
The FortiFone FON-570 allows you to navigate through menus using the touchscreen. To enter
the menu, tap .
Entering values with the dial pad and softkeys
Use the dial pad to input numbers, letters, special characters, and a period. The dial pad mode
is displayed above the second softkey as for numeric, for uppercase characters,
for lowercase characters and to be able to enter any of the characters.
To enter characters with the dial pad, use the digit with the desired character. Press the same
digit repeatedly until the desired character appears in the LCD. After entering a character, pause
to allow the cursor to move to next character position.
Other special entries include:
• To enter a period or dot (for example, to input an IP address), press _ on the dial pad.
• To delete a letter in front of the cursor, tap the Delete softkey.
• To enter special characters, press _ on the dial pad while the mode softkey is set to ,
or .
• To enter a space, press : on the dial pad while the mode softkey is set to , or .
Prior to saving an entry, you may discard changes by tapping to move to the previous menu,
or tap to exit the Settings menu and return to the Home screen.
Setting an outgoing access code as an access code prefix
If you need to dial a number to access an outside line, you will want to program your phone to
automatically insert an Outgoing Access Code. This will automatically dial your Outgoing
Access Code before all calls placed from the Missed and Received call logs as well as from the
Phone Book.
To set an Outgoing Access Code:
1. Tap , select Features > Outgoing Access Code.
2. Tap to set the Outgoing Access Code to ENABLE.
3. Enter the Outgoing Access Code within the Code field.
4. Tap Save.
To Next Page
Loading...
