1918
Installation
Desktop / Extended Feet Option
1. Place the unit on a flat, clean and stable surface
2. Ensure there is at least 38mm(1.5in) of clearance for adequate airflow
3. Plug the provided power cable into the rear of the unit and then into a
grounded electrical outlet or separate power source
38mm(1.5in)
Your device is already equipped with feet for a flat surface. You can
optionally install the extended grey feet for more surface clearance.
38mm(1.5in)
38mm(1.5in)
38mm(1.5in)
Rack/Rail Mount Option
Fortinet carries a variety of standard and custom rack and rail mount
accessories, including a rack mount tray kit, SP-RACKTRAY-02.
SP-RACKTRAY-02
To Next Page
Loading...
