NVR configuration Page 15 FortiRecorder 2.4.2 Administration Guide
4. In the Name field of the login page, type admin, then click Login. (In its default state, there is
no password for this account.)
Login credentials entered are encrypted before they are sent to the FortiRecorder appliance.
If your login is successful, the web UI appears.
See also
• Connectivity issues
• Login issues
Connecting to FortiRecorder CLI
For initial configuration, you can access the CLI from your management computer using either
of these two ways:
• a local serial console connection
• an SSH connection, either local or through the network
To connect to the CLI using a local serial console connection, you must have:
• a computer with a serial communications (COM) port
• the RJ-45-to-DB-9 serial or null modem cable included in your FortiRecorder package
• terminal emulation software, such as HyperTerminal for Microsoft Windows
To connect to the CLI using an SSH connection, you must have:
• a computer with an Ethernet port
• a crossover Ethernet cable
• an SSH client, such as PuTTY
Table 5: Default settings for connecting to the CLI by SSH
Network Interface port1
IP Address 192.168.1.99
SSH Port Number 22
Administrator
Account
admin
Password (none)
To Next Page
Loading...