Page 68
Notifications
When a significant event happens, such as motion-triggered video recording or the hard disk
being full, your FortiRecorder NVR can notify you, either by email or SMS messages.
Notification configuration workflow
To configure the notifications, follow these steps:
1. Configure the SMTP mail server settings so that FortiRecorder can send out notification
email. See “Configuring FortiRecorder to send notification email”.
2. Configure the SMS server settings so that FortiRecorder can send out SMS messages. See
“Configuring FortiRecorder to send SMS messages”.
3. Configure the camera settings about what, when and to whom the notifications should be
sent. See “Configuring cameras to send notifications”.
4. Monitor the record of notification events by going to Monitor > Camera Notifications >
Notification Events.
Configuring FortiRecorder to send notification email
For FortiRecorder to send email, you must specify an SMTP server to use.
1. Go to System > Configuration > Mail Server Settings.
To Next Page
Loading...