Appendix A: Port numbers Page 158 FortiRecorder 2.4.2 Administration Guide
See also
• Establishing IP sessions
23 TCP Telnet administrative CLI access. See “NVR configuration”.
80 TCP HTTP administrative web UI access. See “NVR configuration”.
443 TCP HTTPS administrative web UI access. Only occurs if the
destination address is a network interface’s IP address. See
“NVR configuration”.
Dynamic UDP Receiving video from cameras (RTP). See “Configuring video
profiles”.
554 TCP Live video feeds (RTP) in the HTTP/HTTPS administrative
web UI. See “Video monitoring”.
8550 TCP FortiRecorder Central access.
Table 15: Default ports used by FortiRecorder for incoming traffic (listening)
Port number Protocol Purpose
To Next Page
Loading...