User management Page 57 FortiRecorder 2.4.2 Administration Guide
User profile With a user profile, you can specify which group of camera video feeds
and recordings the account will be able to access. You can also use
schedules to control when the user is allowed to access the video. For
details, see “Configuring schedules” on page 28.
To configure a user profile, click New or go to System > Administrator
> User Profile.
kifnefwoacfsceihvafhofosathihaIPf danf dafwoacftrnfrttaoofrvvfeif daf
trTacrofrvvf daf hTa .
Access profile If you are creating an administrator account, you can specify an
access profile to grant the account certain access privileges.
To configure an access profile, go to System > Administrator > Access
Profile.
The administrator account can have read-only, read-write, or no
access rights to the following administrative categories:
• System Access — Controls settings critical to network
accessibility of FortiRecorder
• System Status page
• GUI console
• Network
• Administrator
• Authentication and certificates
• System — Controls other system settings
• Time
• Remote storage
• Log settings
• Alert email
• Camera Config — Controls camera installation and configuration
• Camera View — Monitor page with video, timeline and camera
control
• Other — Everything else
Setting name Description
To Next Page
Loading...