Fortinet FortiSIEM 2000G - Page 19

Appliance Setup
9. Click Save.
10.
Repeat steps 1-9 to add any additional instances to Manager.
Now, follow the instructions in Register the Instance Itself to Manager for each instance.
Register the Instance Itself to Manager
To register your instance with Manager, take the following steps.
1. From your FortiSIEMSupervisor/Instance, navigate to ADMIN > Setup > FortiSIEMManager, and take the
following steps.
a. In the FortiSIEM Manager FQDN/IP field, enter the FortiSIEM Manager Fully Qualified Domain Name
(FQDN) or IP address.
b. In the FortiSIEM Instance Name field, enter the instance name used when adding the instance to Manager.
c. In the Account field, enter the Admin User name used when adding the instance to Manager.
d. In the Password field, enter your password to be associated with the Admin User name.
e. In the Confirm Password field, re-enter your password.
f. Click Test to verify the configuration.
g. Click Register.
A dialog box displaying "Registered successfully" should appear if everything is valid.
FortiSIEM 6.6.2 2000G Hardware Configuration Guide 19
Fortinet Inc.