Appliance Setup
3. Go to ADMIN > Setup > Organizations and click New to add an Organization.
4. Enter the Organization Name, Admin User, Admin Password, and Admin Email.
5. Under Collectors, click New.
6. Enter the Collector Name, Guaranteed EPS, Start Time, and End Time.
The last two values could be set as Unlimited. Guaranteed EPS is the EPS that the Collector will always be able
to send. It could send more if there is excess EPS available.
7.
SSH to the Collector and run following script to register Collectors:
# /opt/phoenix/bin/phProvisionCollector --add <user> '<password>' <Super IP or
Host> <Organization> <CollectorName>
The password should be enclosed in single quotes to ensure that any non-alphanumeric characters are escaped.
a.
Set user and password use the admin User Name and password for the Supervisor.
b.
Set Super IP or Host as the Supervisor's IP address.
c.
Set Organization as the name of an organization created on the Super.
d. Set CollectorName from Step 6.
The Collector will reboot during the Registration.
FortiSIEM 6.6.2 2000G Hardware Configuration Guide 22
Fortinet Inc.
To Next Page
Loading...
