Fortinet FortiSIEM 2000G - Page 7

Appliance Setup
1. Log in as user root with the password you set in Step 3 above.
2.
At the command prompt, go to /usr/local/bin and enter configFSM.sh, for example:
# configFSM.sh
3. In VM console, select 1 Set Timezone and then press Next.
4. Select your Region, and press Next.
5. Select your Country, and press Next.
6. Select the Country and City for your timezone, and press Next.
7. If installing a Supervisor, select 1 Supervisor, and press Next.
If installing a Worker, select 2 Worker, and press Next.
If installing a Collector, select 3 Collector, and press Next.
If Installing FortiSIEMManager, select 4 FortiSIEMManager, and press Next.
FortiSIEM 6.6.2 2000G Hardware Configuration Guide 7
Fortinet Inc.