Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 265

- 265 -
This command is used to configure the TACACS+ authentication and encryption key.
Syntax
key [<key-string> | encrypted <key-string>]
Note that the length of the secret key is up to 128 characters.
< key-string > - The valid value of the key.
encrypted - the key string is encrypted.
Default Setting
None
Command Mode
TACACS Host Config
This command is used to configure the TACACS+ authentication host port.
Syntax
port [<port-number>]
<port-number> - The valid port number. Range (0 – 65535)>
Default Setting
49
Command Mode
TACACS Host Config
This command is used to configure the TACACS+ authentication host priority.
Syntax
priority [<priority>]
<priority> - The valid priority number. Range (0 – 65535)>