Fortinet FortiSwitch-548B v. 5.2.0.2 - Page 266

- 266 -
Default Setting
0
Command Mode
TACACS Host Config
7.8.5.3 tacacs timeout
This command is used to configure the TACACS+ connection timeout value.
Syntax
tacacs timeout [<timeout>]
no tacacs timeout
<timeout> - The connection timeout value. Max timeout (Range: 1 to 30).
no - This command is used to reset the timeout value to the default value.
Default Setting
5
Command Mode
Global Config
This command is used to configure the TACACS+ connection timeout value.
Syntax
timeout [<timeout>]
<timeout> - The connection timeout value. Max timeout (Range: 1 to 30).
Default Setting
5
Command Mode
TACACS Host Config