Fortior Tech FU68 Series - Page 5

chart 1-1-2
The above picture is only for reference, specific parameters are listed below:
Item Index
Function
Remark
1
USB data lines
2
LCD display panel
3 Online/Offline switch
1:On-line(Default); 0:Off-line
4
SW1 switch to low default
Mode selection switch SW2 Related to SW3，See tab 1-2
Mode selection switch SW3 Related to SW2, See tab 1-2
Mode selection switch SW4 Reserved
5
IC Socket
6 Execution Key Press key after select mode
7
Product write port Support write target without socket
8
Status led Green:Success; Red：Fail; Blue:fetch out
IC after write successfully
Tab 1-1
Mode Configuration Parameters table 1-2
SW2
SW3
SW4
Mode
1
1
0
Verify Mode
1
0
0
Erase Mode
0
1
0
Write Mode (Default)
0
0
0
Reserved
Tab 1-2
Rev_V1.8 5 / 20 www.fortiortech.com