1.2.2 Writer UI
Writer main UI is as the figure shows below：
Chart 1-2-2
1.2.3 Hardware Setting
Now user can make the switch to Online on the left of the writer, and then connect
it to the PC machine with USB data line. If user does this, the hardware will enter the
online download mode, the hareware connection graph is shown as the following:
Chart 1-2-3
1.2.4 Device Enumeration
When user connects on hardware board with the usb data line, the software
writer tool will find the usb device automatically, see the below picture:
Chart 1-2-4
Rev_V1.8 7 / 20 www.fortiortech.com
To Next Page
Loading...