Lubricating Oil
The treadmill is oiled when leaving the factory, but lubrication of the treadmill should be
inspected frequently to maintain the condition of the treadmill. The treadmill must be oiled
after 1 year or running for 100 hours.
1. Lift one side of the running belt and touch the surface of the running platform after
running for 30 hours or 30 days. It is unnecessary to lubricate if there is silicone oil
on the surface.
2. If the surface is dry, open the oil cap and pour the non-petroleum silicone oil into
the oil port as shown in the image. Turn on the treadmill to run for some time.
Cleaning
Frequently clean the treadmill to guarantee its service life.
• Cut off the power when cleaning the treadmill. The power line must be pulled out
from the outlet.
• Clean sweat stains on the instrument and other parts with a clean towel and damp
cloth.
• Do not use corrosive articles and liquid to prevent damage to electronic elements.
Do not expose electronic elements to sunlight.
• Place the treadmill in a clean and dry environment. Ensure that power switch is off
and is not plugged to a power outlet.
Note: Do not operate the treadmill while lubricating. Use only non-petroleum
silicone oil.
To Next Page
Loading...
