EasyManuals Logo

Fortress Technologies FDH1610 User Manual

Default Icon
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
Trouble shooting
THE UNIT DOES NOT OPERATE:
Is the unit plugged in?
Is the house electricity on?
Is the room temperature below 5
o
C or above 35
o
C? If so, then it is out of the
working range of the unit.
Ensure the humidistat (or ON/OFF switch) is turned on.
Check the water tank is positioned properly in the unit and it is not full.
Make sure the air inlet and outlet are not obstructed.
THE UNIT SEEMS TO DO NOTHING:
Q: Is the filter dusty, contaminated ?
A: Use a vacuum cleaner or tap the filter lightly for easy cleaning. If the filter is
particularly dirty, use warm water with a small amount of medium strength.
Q: Is the air intake or outlet blocked up?
A: Please move the object away from the air intake or outlet.
Q: Is the room humidity already quite low?
A: The dehumidifier shall not operate if the humidity setting is higher than the
ambient humidity.
THE UNIT SEEMS TO DO LITTLE:
Q: Are too many windows or doors open?
A: Please close the windows or doors when operating the dehumidifier.
Q: Is there something in the room producing lots of humidity?
A: Please put these stuffs into another room, close toilet lid and cover a glass
of water.
THE UNIT IS TOO NOISY:
Check whether the unit is sitting on a level surface.
THE UNIT IS LEAKING:
Make sure the unit is working in good condition.
If you are not using continuous drainage, make sure the rubber plug (in the
rear) is in its position.
9

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fortress Technologies FDH1610 and is the answer not in the manual?

Fortress Technologies FDH1610 Specifications

General IconGeneral
BrandFortress Technologies
ModelFDH1610
CategoryDehumidifier
LanguageEnglish

Related product manuals