Fortress Technologies FDH1610 User Manual

Continuous drainage
When the dehumidifier is operated at very high humidity levels, the water tank will
require more frequent drainage. In this situation, it may be more convenient to set the
unit up for continuous drainage with the following procedures:
1. Cut the outlet at the unit back. (FIG.3).
* Caution:
When the outlet is cut off, the said portion would leave as a hole and
cannot be covered by any plug. If cover the said portion by plug,
the drainage water cannot go down to the water tank.
2. Connect the drain hole with a water tube of inner diameter 12mm. (FIG.4)
* Please note, the water tube is not supplied with the unit.
3. Ensure the water will always drain away freely and the tube will remain in place.
FIG.3
FIG.4
6

Fortress Technologies FDH1610 Specifications

General

Brand	Fortress Technologies
Model	FDH1610
Category	Dehumidifier
Language	English