3. compressor is in progress. In case the de-frost function is working, the
water drops will flash.
compressor is not in progress.
water full.
4. Timer indicator, 1 to 24 hours.
5. Current relative humidity display.
6. Fan speed/ventilation indicator: high speed, low speed.
Operation
1. Plug the unit into a correct mains socket.
2. Press button ON/OFF to turn on the unit. The compressor will start to work in
continuous mode.
3. Press button (HUM) to set the room humidity you need: continuous
de-humidifying , 50%, 60%, 70% or 80%
4. Press the (SPEED) button to choose the ventilation speed, high or low.
5. To turn off the unit, press button ON/OFF again.
6. The direction of the air outlet can be adjusted by hand
to dry clothes more efficiently.
.
4
To Next Page
Loading...
