Foscam B4 - Detector and Recording Settings; Detector Settings; Motion Detection Configuration; Storage Management Options

40
4.6.4 Detector
4.6.4.1 Motion Detection
Battery powered cameras mainly rely on Activity detection. When the camera detects a live body, the
camera operates and sends an alarm recording and alarm push to your app and VMS. If no live body is
detected, the battery powered camera is in a dormant state.
4.5.5Record
4.5.5.1 Storage Management
On this page you can choose Record Storage Path. The record storage path default is SD card.
4.5.6 System
In this panel, you can Reset and Reboot your camera settings.