Need help?Do you have a question about the Foscam SD2X and is the answer not in the manual?
General| Form factor | Dome |
|---|---|
| Mounting type | Wall |
| Product color | White |
| International Protection (IP) code | IP66 |
| Camera pan control | - |
| Minimum illumination | 0 lx |
| Optical zoom | 18 x |
| Zoom capability | Yes |
| Number of lenses | 1 |
| Focal length range | 5.4 - 97.2 mm |
| Maximum aperture number | 3.6 |
| Minimum aperture number | 1.7 |
| LED type | IR |
| Night vision distance | 50 m |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 240p, 480p, 720p, 1080p |
| Video formats supported | H.264 |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Supported graphics resolutions | 320 x 240, 640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| Wi-Fi standards | 802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac) |
| Wi-Fi data rate (max) | 450 Mbit/s |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IP, TCP, UDP, HTTP, HTTPS, DHCP, SMTP, FTP, RTSP, ONVIF |
| Type | IP security camera |
| Antenna type | External |
| Certification | FCC, CE, RoHS |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wireless |
| Built-in HDD | No |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 128 GB |
| Security algorithms | WPA, WPA2 |
| Alert notification type | |
| Sensor type | CMOS |
| Optical sensor size | 1/2.9 \ |
| Power consumption | 200 mA |
| Power consumption (max) | 20 W |
| Storage temperature (T-T) | -20 - 50 °C |
| Operating temperature (T-T) | -20 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Operating relative humidity (H-H) | 20 - 85 % |
| Mobile operating systems supported | Android, iOS |
| Cables included | LAN (RJ-45) |
| Audio system | 2-way |
Weight and Dimensions| Depth | 136 mm |
|---|---|
| Width | 246 mm |
| Height | 202 mm |
| Weight | 1500 g |
Guides on connecting the camera via Ethernet using the Foscam App for initial setup.
Explains how to access the camera within the local network (LAN).
Guides on accessing the camera remotely over the internet (WAN).
Configures network connectivity, including IP, Wi-Fi, ports, mail, FTP, P2P, and ONVIF.
Configures video stream parameters, on-screen display, and snapshot settings.
Sets up motion and sound detection for triggering alarms and notifications.
Manages storage locations and configures alarm and scheduled recording.
Adjusts PTZ speeds and manages camera cruise tracks for automated movement.
Controls network access by specifying allowed or blocked IP addresses.
Manages system maintenance tasks like backup, restore, and firmware upgrades.
To Next Page
