Foscam SD2X - Read before Use; Packing Contents; Physical Description

3
1.2 Read before Use
Please first verify that all contents received are complete according to the Package Contents listed below.
Before the Network Camera is installed, please carefully read and follow the instructions in the Quick
Setup Guide to avoid damage due to faulty assembly and installation. This also ensures the product is
used properly as intended.
1.3 Packing Contents
● IP Camera × 1
● Power Adapter × 1
● Quick Setup Guide × 1
● Ethernet Cable× 1
● Mounting Plate × 1
● Wi-Fi Antenna× 1
● Screwdriver × 1
● Tweezers × 1
1.4 Physical Description
Antenna: Wireless Antenna
LAN: 10/100M adaptive Ethernet interface. Through this interface, IP camera can be connected with
various network devices, such as hub, router, etc.
Microphone: Built-in Microphone.
Audio Out interface: The jack is used to plug external output device such as loud speaker directly. Here
speaker cannot directly insert to the interface, it must connect to adapter first.
Power: Connect the external power adapter, request for 12V / 2A power.
Lens: High Definition Color CMOS Sensor with zoom lens.