3.3 Access the Camera in WAN
Static IP Addresses
Users with static IP addresses after you have finished connecting the camera using the LAN IP address
and port forwarding, you can access the camera directly from Internet using the WAN IP address and
port number
How to Obtain the WAN IP address from a public website ?
To obtain your WAN IP address, enter the following URL in your browser:
http://www.whatismyip.com.The web page at this address will show you the current WAN IP.
Access your IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port
number in your standard browser. For example, you would enter http:// 183.37.28.254:88
3.4 Using the VLC Player
This camera supports RTSP streaming, here you can view the camera using VLC player.
RTSP URL rtsp:// [user name][:password]@IP:port number/videosream
The part in the square brackets may be omitted.
user name & password:
The user name and password to access the camera. This part can be omitted.
IP: WAN or LAN IP address.
port number: If there is the RSTP port number on the Port page, you must only use RTSP port number.
otherwise, you must only use http port number.
Videostream: Here support two modes: videoMain and videoSub. When the network speed is bad, here
To Next Page
Loading...
Need help?
General
Weight and Dimensions
