Foscam SD2X - Default Parameters; Specification

111
More FAQs are available here:
https://www.foscam.com/faqs/index.html
5.2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
Username and password
Default admin username: admin with a random password
5.3 Specification
Image Sensor
Sensor
High Definition Color CMOS Sensor
Display Resolution
2.0MegaPixels
Min. Illumination
0 Lux (With IR Illuminator)
Lens
Lens Type
Glass Lens
Focal Length
f: 5.4mm-97.2mm
Aperture
F1.7~F3.6
Angle of View
Horizontal: 3.55°~55.4° Diagonal : :4.05°~62.6°
Video
Image Compression
H.264
Image Frame Rate
25fps（1080P）/15fps（720P）/, downward adjustable
Resolution
1080P(1920x1080),720P(1280 x 720), VGA(640 x 480),
QVGA(320 x 240)
Stream
Dual stream
Image Adjustment
The hue, brightness, contrast, saturation, sharpness are
adjustable
Flip Image
flip and mirror
Infrared Mode
Automatic and manual
IR Range
6pcs Infrared-LEDs, night vision range up to 50 metres
Audio
Input/Output
Supports two-way audio
Audio Compression
PCM/G.726
Network
Ethernet
One 10/100Mbps RJ45 port
Remote Access
P2P
Data Rate
IEEE802.11b: 11Mbps(Max.);
IEEE802.11g: 54Mbps(Max.);
IEEE802.11n: 150Mbps(Max.).
IEEE802.11ac: 433Mbps(Max.).
Wireless Standard
2.4G/5G dual band, IEEE802.11b/g/n/ac
Network Protocol
IP、TCP、UDP、HTTP、HTTPS、SMTP、FTP、DHCP、
RTSP、ONVIF