4
Wired Connection
1. Please tighten the antenna clockwise and make sure it is in a vertical position.
2. Connect the camera to your router with an Ethernet cable.
3. Plug the power adapter into the camera, and then wait for about 1 minute.
4. Make sure your smart phone is connected to the same WiFi network as the
camera.
Tips: You need to connect to the 2.4GHz network if your WiFi router is dual-band—most
newer routers have both 2.4GHz and 5GHz channels. For example, choose SSID:
XXXXX_2.4G.
5. Open the Foscam APP and please register a Foscam account, or sign in if you
have one already.
6. After logging into Foscam APP, select “Tap to add a camera” or "+" icon on the
upper right corner, then select "Scan the QR code" and scan the QR code that
labelled at the bottom of your camera.
clockwis
To Next Page
Loading...
