Foscam FI9905B - Default Parameters; Specification

70
port forwarding. When it unable to connect remotely, below tips can help app establish the connection:
(1) Update app and camera’s firmware to latest version,
(2) Power off the camera then power back on,
(3) Delete camera from app then re-add it back, also lower camera’s resolution.
6.1.9 Camera is added by others
When use myfoscam.com cloud or Foscam app, one camera can only be added to one account at the same
time. To solve error “This camera has already been added by another account” when add camera to Foscam
app or cloud, please send a clear photo of camera’s model sticker to Foscam support email
support@foscam.com to unbind it.
More FAQs are available here:
https://www.foscam.com/faqs/index.html
6.2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
Username and password
Default admin username: admin with a blank password
6.3 Specification
ITEMS
FI9803P
Image Sensor
Sensor
High Definition Color CMOS Sensor
Display Resolution
1.0 Megapixels
Min. Illumination
0 Lux (with IR Illuminator)
Lens
Lens Type
Glass Lens
focal length
f:2.8mm
Aperture
F2.0
Angle of View
Horizontal:70º
Diagonal :75º
Video
Image Compression
H.264
Image Frame Rate
23fps (1280 * 720), 25fps (VGA), 25fps (QVGA)
Stream
dual stream
Image adjustment
The hue, brightness, contrast, saturation, sharpness are
adjustable
Flip image
flip and mirror