Foscam FI9962EP - Default Parameters; Specification

62
you do port forwarding manually in your router.
6.2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
DDNS: Embedded FOSCAM DDNS Service
Username and password
Default admin username: admin with a blank password
6.3 Specification
Image Sensor
Sensor
High Definition Color CMOS Sensor
Display Resolution
FI9961EP: 2.0 Megapixels
FI9962EP: 4.0 Megapixels
Min. Illumination
0 Lux (With IR Illuminator)
Lens
Lens Type
Glass Lens
Focal Length
f: 4mm
Aperture
F2.0
Angle of View
When f=4mm, Horizontal≧60°
Video
Image Compression
H.264
Image Frame Rate
30fps (60Hz), 25fps (50Hz), downward adjustable
Resolution
2.0 Megapixels (1920 * 1080)
4.0 Megapixels (2560 * 1440)
VGA (640 * 480), QVGA (320 * 240)
Stream
dual stream
Image Adjustment
The hue, brightness, contrast, saturation, sharpness are
adjustable
Flip Image
flip and mirror
Infrared Mode
Automatic or manual
IR Range
Infrared lamp array, IR LEDs for IR range up to 10 meters
(33ft)
Network
Ethernet
One 10/100Mbps RJ45 port
Remote Access
P2P DDNS
PoE
IEEE. 802.3af
Network Protocol
IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, DDNS,
UPnP, ARP, P2P, RTSP, ONVIF
System
Requirements
Operating System
Microsoft Windows 2000/XP, Vista, 7;
Mac OS
Browser
Microsoft IE8 and above version or compatible browser;
Mozilla Firefox;