10
Tips: Place the QR code about 10 to 15 centimetres from
your camera.
Wait a few seconds until the camera notifies you that
the “Wireless connection succeeded”, which means your
camera has connected to your Wi-Fi successfully. After
that, you can set the camera name and tap “Save” in “Set
name” interface.
Note: If the process of adding a camera fails, please
reset your camera, and try it again according to the
described method.
Tapping on the play button within the video box will
jump to the “Camera Login” setting interface. For your
security, please set a new username and password for
your camera before viewing live video.
After completing the above steps, you can begin to use
the camera.
To Next Page
Loading...
Need help?
General
