Foscam V8EP - Default Parameters; Specification

7
4. Align the waterproof connector with the Ethernet port, then twist it clockwise to tighten the two parts.
5. Push the rubber seal ring into the waterproof connector, then screw the top cover and lock it into position
firmly to finish installation.
2 Default Parameters
Default network parameters
IP address: obtain dynamically
Subnet mask: obtain dynamically
Gateway: obtain dynamically
3 Specification
ITEMS
V8EP
Spotlight
Color Temperature
4500K
Image Sensor
Sensor Type
High Definition Color CMOS Sensor
Display Resolution
8.0Megapixels(3840*2160)
Min. Illumination
0 Lux (With IR Illuminator)
Lens
Lens Type
f:4.3mm; F1.6
Angle of view
Diagonal: 108.5°, Horizontal: 90.1°, Vertical 46.2°
Video
Image Compression
H.264+/H.264
Resolution
4K(3840*2160) 6M/20 fps,1080P(1920*1080)1M/25fps,
720P(1280*720)1M/15fps
Stream
Dual stream
Image Adjustment
The hue, brightness, contrast, saturation, sharpness are adjustable
Flip Image
flip and mirror
Night Mode
Manual and automatic modes, when the white light is on, the night
vision image is colored