Need help?Do you have a question about the Foscam D2EP and is the answer not in the manual?
General| Wi-Fi | No |
|---|---|
| Ethernet LAN | Yes |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | IP, TCP, UDP, HTTP, HTTPS, SMTP, FTP, DHCP, RTSP, ONVIF |
| Audio system | 2-way |
| Audio input channels | 1 channels |
| Audio formats supported | G.726, PCM |
| IK code | IK10 |
| Form factor | Dome |
| Mounting type | Ceiling/wall |
| Product color | White |
| International Protection (IP) code | IP66 |
| Total megapixels | 2 MP |
| Maximum resolution | 1920 x 1080 pixels |
| Supported video modes | 720p, 1080p |
| Video formats supported | H.264 |
| Image quality adjustment | Brightness, Contrast, Saturation, Sharpness |
| Supported graphics resolutions | 320 x 240, 640 x 480 (VGA), 1280 x 720 (HD 720), 1920 x 1080 (HD 1080) |
| Type | IP security camera |
| Certification | CE, FCC |
| Placement supported | Indoor & outdoor |
| Connectivity technology | Wired |
| DC output current | 1 A |
| DC output voltage | 12 |
| Power source type | DC, PoE |
| Power consumption (typical) | 4.5 W |
| Alert notification type | |
| Sensor type | CMOS |
| Number of sensors | 1 |
| Optical sensor size | 1/2.7 \ |
| LED type | IR |
| Night vision distance | 20 m |
| Number of illumination LEDs | 2 |
| Minimum illumination | 0 lx |
| Fixed focal length | 2.8 mm |
| Built-in HDD | - |
| Compatible memory cards | MicroSD (TransFlash) |
| Maximum memory card size | 128 GB |
| Storage temperature (T-T) | -20 - 60 °C |
| Operating temperature (T-T) | -10 - 60 °C |
| Storage relative humidity (H-H) | 0 - 90 % |
| Operating relative humidity (H-H) | 10 - 80 % |
| Sustainability certificates | RoHS |
| Harmonized System (HS) code | 85258900 |
Weight and Dimensions| Width | 112 mm |
|---|---|
| Height | 88 mm |
| Length | 112.5 mm |
| Weight | 700 g |
Overview of items included and the first steps for setting up the camera.
Identification of the camera's physical components and connection interfaces.
Recommendations for password strength and keeping firmware updated.
Step-by-step guide to connect the camera to your router via Ethernet.
Using the Foscam app to scan the QR code and add the camera.
Setting up a secure username and password for camera access.
Using Foscam VMS for PCs and accessing cameras via the cloud.
Supported storage options and procedures for upgrading camera firmware.
Installing the mounting plate and securing the camera base to the wall.
Connecting cables, passing wires, and adjusting the camera lens angle.
Managing Foscam app/cloud accounts and essential safety precautions.
Information on obtaining technical assistance and warranty conditions.
Details on power supply, EU Declaration of Conformity, and product specifications.
Instructions for environmentally responsible disposal of the product.
To Next Page
